Cutting Tools and Machines
Start with the cutting operation
This collection is part of Yuri’s power tools range. Choose the machine format before comparing motor ratings:
- Cut-off machines: The YR-CM1045 is described for mild-steel pipes, tubes, rods and similar ferrous sections with a suitable 355mm cutting wheel.
- Circular and mitre saws: Compare blade format and the cutting-capacity chart for the required workpiece and angle. The collection lists a 185mm circular saw and 255mm, 305mm and 355mm mitre saws.
- Marble, wall and concrete-cutting formats: Select the tool and approved blade for the material, access and required cut. Diameter alone does not establish cutting depth or compatibility.
Capacity changes with setup
The Dayuri MS5036 mitre saw lists 80 × 162mm capacity at its 0°/90° setting and 57 × 137mm at 45°/45°. Choose the capacity-chart entry for the angle required by the job.
Power supply also varies. Some cut-off machines list 220V or 230V, while the DA-CM5049 lists 380V. Select for the actual site supply.
Choose the consumable and job stage
Browse cutting wheels for suitable cut-off consumables and diamond saw blades where the machine and material call for that blade type. Confirm diameter, bore, operating speed, mounting and permitted use for the particular combination.
For seating tiles or consolidating fresh concrete, use the separate concrete and tile installation tools; those operations are distinct from cutting.
Match the cutting machine to the job
Use the cutting-machine selection guide to compare machine types around the material, workpiece and cut. Choose the machine class before checking its approved blade or cutting-wheel configuration.
Frequently Asked Questions
Does a 355mm wheel mean a machine can cut a 355mm-deep workpiece?
No. Wheel diameter is an accessory dimension. Cutting capacity depends on the machine, workpiece shape, angle and approved setup; use the machine’s capacity chart.
Is the highest-wattage machine the right choice for every cut?
No. The required operation, approved material, capacity, blade system and available power supply determine suitability. Wattage alone does not establish a better result.