Flap Discs for Grinding and Surface Finishing
Choose size and grit together
Flap discs sit within Yuri’s abrasives range. The Greenline Flap Disc currently offers 100 × 16mm options in A36, A60, A80 and A120, plus 125 × 22mm options in A60 and A80, in packs of 20.
A coarser grit generally suits greater material removal; a finer grit is used when the surface needs further refinement. The Greenline Flexible Flap Disc table lists a 100 × 16mm format in #80, #120, #220 and #320, providing a different grit selection from the standard Greenline options. Yuri’s flap-disc grit guide explains the coarse-to-fine selection principle.
Mounting and speed come before use
Diameter, bore, wheel form and mounting arrangement must suit the machine. Speed limits vary with the disc size and listing; a rating printed for one 100mm disc must not be applied to every disc in the collection.
For a different abrasive construction, compare fibre discs, which require the appropriate backing arrangement. For hook-and-loop surface abrasives, browse Velcro discs. Each construction needs its own approved mounting setup.
Choose the disc for the stage of work
The flap-disc guide provides a starting point for comparing disc construction and surface-work requirements. Use the particular disc's material and machine approval when choosing from the range.
People Also Ask
Can a flap disc be used as a cut-off wheel?
Choose a wheel specifically approved for cutting when the job is to separate material. A flap disc’s listed grit and diameter do not provide cutting approval.
Should I use one flap-disc grit for the whole job?
A removal stage and a finishing stage may call for different grits. Within the Greenline options, A36 is coarser than A80 or A120. Choose the finishing step for the required surface profile and material approval rather than assuming one grit suits every stage.